福建利豪电子科技股份有限公司
FUJIAN LIHAO ELECTRONIC TECHNOLOGY CO., LTD.
福建省南安市霞美镇
TEL:0595-86785298 FAX:0595-86785296
CEM-3 TDS
CEM-3单面板 Single Sided
CEM-3 是复合基(玻纤纸、玻纤布)覆铜箔层压板,具有良好的耐湿、耐热性及尺寸稳定性,并且适用于低温冲孔加工作业。
CEM-3 is a composite substrate (fiberglass paper, fiberglass cloth) copper clad laminate with excellent performance in flame resistance and dimensional stability.It has good heat and humidity resistance and is suitable for cold punching.
级别组成Grade and Construction
型号Type | 级别Grade | 组成Construction |
CEM-3 | CPFCP(G)-41F | 酚醛树脂、环氧树脂、玻纤布、玻纤纸、铜箔 Phenolic resin,epoxy resin,fiberglass cloth, fiberglass paper,copper foil |
特点 Feature
·通用型
Low cost but with wide range of application
·弯曲度、扭曲度小且稳定
Warpage and twist are small and stable
·优异的耐湿热性
Excellent heat and humidity resistance
·尺寸稳定性优越
Excellent dimensional stability
标准数据 Standard configuration
厚度 Thickness :0.8mm-1.6mm
常规尺寸 Regular Size(mm) :1041*1245
其它尺寸 Other Size :As specified by customers
一般性能 General Properties
序号 NO. | 检测项目 Item | 单位 Unit | 检测条件 Test Condition | 标准值 Standard Value | 典型值 Typical Value |
1 | 耐焊性(260℃) Solder resistance | 秒/Sec | A | ≥10 | 18 |
2 | 剥离强度(25μm铜箔) Peel Strength (Copper Foil 25μm) | N/mm | A | ≥1.2 | 1.4-1.6 |
3 | 弯曲强度 Fleural Strength | MPa | 纵向Lengthwise | ≥276 | 312 |
横向 Crosswise | ≥186 | 138 | |||
4 | 吸水率 Water Absorption | % | E-24+D-24/23 | ≤0.5 | 0.43 |
5 | 表面电阻 Surface Resistance | MΩ | C-96/35/90 | ≥1.0*104 | 3.5*104 |
6 | 体积电阻 Volume Resistivity | MΩ.cm | C-96/35/90 | ≥1.0*106 | 6.3*106 |
7 | 介电常数(1MHz) Dielectric Constant | - | C-96/40/90 | ≤5.4 | 4.4 |
8 | 介电损耗因素(1MHz) Dissipation Factor | C-96/40/90 | ≤0.035 | 0.032 | |
9 | 冲孔温度 Punching Temperature | ℃ | 室温-90 Ambient -90 | 50-90 |
注 Remark:1. 试验方法参照GB/T 4724-2017
The test methods are according to GB/T 4722-2017
2. 包装、标志、运输和储存按照GB/T 4721 中的规定;
Packing, marking, transportation and storage shall be in accordance with GB/T 4721
3. 样品厚度:1.6mm,典型值只作参考
Specimen Thickness:1.6mm, Typical values for reference only